Adjustable Deck Pedestals
Elevated Deck Systems® is the top 2024 Authorized Bison Level.It US Dealer.
Are you building a commercial rooftop or raised deck? We’ve been helping architects, designers, builders and homeowners build amazing elevated decks for decades!
If you just discovered Bison Level.It adjustable deck supports, great job! Let’s get you started on the right foot and avoid the mistakes so many people make when building their first elevated deck! Call us today to get started.
VERSADJUST™ ADJUSTABLE PEDESTAL | V1-18 OR V1-316 | |
---|---|
Height Range | 2 1/4″ – 2 3/4″ (57 – 70 mm) |
Base Diameter | 8″ (203.2 mm) |
Weight | 1.5 lbs (0.68 kg)
|
Weight Bearing Capacity | Supports 1250 lbf (5.56 kN) FS:3 per Pedestal |
VERSADJUST™ ADJUSTABLE PEDESTAL | V2-18 OR V2-316 | |
---|---|
Height Range | 2 3/4″ – 3 3/4″ (70 – 95 mm) |
Base Diameter | 8″ (203.2 mm) |
Weight | 1.6 lbs (0.73 kg) |
Weight Bearing Capacity | Supports 1250 lbf (5.56 kN) FS:3 per Pedestal |
VERSADJUST™ ADJUSTABLE PEDESTAL | V3-18 OR V3-316 | |
---|---|
Height Range | 3 3/4″ – 5 3/4″ (95 – 146 mm) |
Base Diameter | 8″ (203.2 mm) |
Weight | 1.8 lbs (0.82 kg) |
Weight Bearing Capacity | Supports 1250 lbf (5.56 kN) FS:3 per Pedestal |
QUICK CLIP EXTENDER – ADDS UP TO 4″ | VC2 | |
---|---|
Height | Adds up to 4″ (101.6 mm) each |
Max Height | Utilize VC2 Extenders to reach Pedestal heights up to 36″ (914.4 mm)
Must use Bison Brace System for Pedestal heights ranging from 24″ to 36″ (609.6 – 914.4 mm)
|
Weight | 0.61 lbs (0.28 kg)
|
ULTRA LOW HEIGHT PEDESTAL | VT18 OR VT316 | |
---|---|
Height | 1/8″ (3.175 mm) |
Base Diameter | 4 11/16″ (119.38 mm) |
Weight | 0.098 lbs (0.044 kg) |
Weight Bearing Capacity | Supports 750 lbf (3.34 kN) FS:3 per Pedestal |
FIXED HEIGHT STACKABLE PEDESTAL | HD25-18 OR HD25-316 | |
---|---|
Height | 1/4″ (6.35 mm) – Stack up to 4 |
Base Diameter | 5 7/8″ (149.225 mm) |
Weight | 0.11 lbs (0.05 kg) |
Weight Bearing Capacity | Supports 750 lbf (3.34 kN) FS:3 per Pedestal |
FIXED HEIGHT STACKABLE PEDESTAL | HD50-18 OR HD50-316 | |
---|---|
Height | 1/2″ (12.7 mm) – Stack up to 4 |
Base Diameter | 5 7/8″ (149.225 mm) |
Weight | 0.18 lbs (0.08 kg) |
Weight Bearing Capacity | Supports 750 lbf (3.34 kN) FS:3 per Pedestal |
FIXED HEIGHT STACKABLE PEDESTAL | HD75-18 OR HD75-316 | |
---|---|
Height | 3/4″ (19.05 mm) – Stack up to 4 |
Base Diameter | 5 7/8″ (149.225 mm) |
Weight | 0.23 lbs (0.10 kg) |
Weight Bearing Capacity | Supports 750 lbf (3.34 kN) FS:3 per Pedestal |
LOW HEIGHT ADJUSTABLE PEDESTAL | LO-18 OR LO-316 | |
---|---|
Height | 1 1/4″ – 2″ (31.75 – 51 mm) |
Base Diameter | 8″ (203.2 mm) |
Weight | 0.72 lbs (0.33 kg) |
Weight Bearing Capacity | Supports 750 lbf (3.34 kN) FS:3 per Pedestal |
PLASTIC SHIM | PS1 | |
---|---|
Height | 1/8″ (3.175 mm) |
Weight | 0.07 lbs (0.03 kg)
|
RUBBER SHIM | B11 | |
---|---|
Height | 12″ x 12″ x 11/16″ (304.8 x 304.8 x 17.463 mm) |
Weight | 1.91 lbs (0.87 kg) |
FLOATING FOUNDATION BASE | FFB | |
---|---|
Height | 12″ x 12″ x 1/4″ (304.8 x 304.8 x 6.35 mm) |
Weight | 0.77 lbs (0.35 kg) |
JOIST TOP ATTACHMENT | JT | |
---|---|
Height | Adds 3/16″ (4.5 mm) in height |
Components | Joist Top Accessory and Decking Screw to attach JT to Pedestal |
BISON BRACE COLLAR | BB-C | |
---|---|
Weight | 0.32 lbs (0.15 kg)
|
BISON BRACE KIT | BB-BRACE | |
---|---|
Length Range | Fits 11 3/4″ – 36″ (298.45 x 914.4 mm) pavers |
Weight | 0.36 lbs (0.16 kg) |
Components | Contains 2 Brace pieces and BB-Latch fasteners |
BISON FIXED HEIGHT BRACE KIT | BB-FH | |
---|---|
Length Range | Fits 8.5″ – 25.5″ (215.9 – 647.7 mm) pavers |
Weight | 0.123 lbs (0.056 kg) |
Components | Contains 2 Brace pieces and BB-Screw fasteners |
BISON FIXED HEIGHT BRACE CONNECTOR | BB-CONNECT | |
---|---|
Weight | 0.022 lbs (10 g) |
BISON BRACE PEG | BB-PEGS | |
---|---|
Weight | 0.005 lbs (2.3 g) |
SUPPORTING A JOIST AND PLANK DECK ON A PEDESTAL SYSTEM. | |
---|---|
The Joist Saddle can be used alone or on top of any Bison Pedestal. A screw is included for attachment to adjustable pedestals. It is designed to support 2x joists in one direction and 4x (or staggered 2x) joists in the other direction. Place a joist between the JS walls and attach it with #8 deck screws (NOT provided). | |
It allows you to install a plank deck while providing efficient draining and airflow beneath the deck. | |
Height: 1/2″ | |
IMPORTANT: Do not overtighten screw when attaching the JS to an adjustable pedestal. |
Johnny Knight, Founder of Elevated Deck Systems®
General Contractor with over 40 years experience in the construction industry. Extensive experience in the technical application of pedestal decking systems for commercial roof top decks. Has been actively involved in installing/supplying pedestal decking systems for over 20 years. Provided deck products and guidance for thousands of raised deck projects throughout the United States.
8625 Aviation Blvd
Inglewood CA 90301
Mon–Fri: 8:00 AM–5:00 PM Saturday, Sunday: Closed
© Elevated Deck Systems Inc. 2024